频率 |
频率范围 |
9kHz ~ 3GHz |
老化率 |
± 10ppm, 0~50°C, 5ppm/年 |
频宽范围 |
2kHz ~ 3GHz 在 1-2-5 顺序步进, 全展频, 零展频 |
相位噪声 |
-80dBc/Hz @1GHz 20kHz offset 典型值 |
扫频时间范围 |
50ms ~ 25.6s |
解析度带宽 |
解析度带宽范围 |
3kHz, 30kHz, 300kHz, 4MHz |
解析频宽精确度 |
20% |
视频频宽范围 |
10Hz ~ 1MHz 1-3 步进 |
幅度 |
测量范围 |
-103dBm ~ +20dBm: 1MHz ~ 15MHz, Ref.Level @ -30dBm
-105dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-105dBm
-105dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-105dBm
(Span = 50kHz, RBW = 3kHz) |
过载保护 |
Max. +30dBm, ±25VDC |
参考电平范围 |
-110dBm ~ +20dBm |
精确度 |
±1.5dB @100MHz |
频率平坦度 |
±1dB |
幅度线性度 |
±1dB over 70dB |
动态范围 |
平均背景噪声 |
<-135±1dBm/Hz: 1MHz ~ 15MHz, Ref.Level @ -30dBm
<-137dBm/Hz, typical -152dBm/Hz: 15MHz ~ 1GHz, Ref.Level ≧-110dBm
<-137dBm/Hz, typical -149dBm/Hz: 1GHz ~ 3GHz, Ref.Level ≧-110dBm |
三阶交调失真 |
<-70dBc RF Input @-40dBm, Ref.Level @-30dBm |
协波失真 |
<-60dBc RF Input <-40dBm , Ref.Level @-30dBm |
非协波伪噪声 |
<-93dBm, 1MHz ~ 15MHz, Ref.Level @-30dBm
<-107dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm
<-104dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm
(Span = 50kHz, RBW = 3kHz) |
总体
|
显示器 |
640 x 480 高分辨率 TFT 彩色 LCD |
分割视窗 |
动态视窗: 上, 下 或交替 (两个同时扫描视窗) |
游标 |
10 组峰值游标: 5 组△游标
功能: Delta, To Peak, To Minimum, Peak Track, Peak Table, Peak Sort |
轨迹侦测 |
3 个轨迹功能：峰值, 最大值保持, 冻结, 平均, 轨迹数学运算 |
功率测量 |
ACPR, OCBW, 信道功率, N dB 带宽和相位抖动 |
自动设定功能 |
自动侦测并显示 |
触发 |
条件: 视频, 模式: 普通, 单次, 连续 |
顺序编程测量 |
可以不通过远端控制软件自动执行测试用户定义的程序段, 10 组顺序程序段设置 和 每个设置可有10 个程序段, 变量延迟 和 等待通过功能使自动测量更容易, 可顺序链接和嵌套不同的顺序设置. |
连接器 |
射频输入
|
N 型母头, 50Ω 标准
射频输入 VSWR: <2:1, @0dBm 参考电平 |
直流输出 (for GAP-801) |
类型: SMB 公头, 最大输出 +9V/100mA. |
接口 |
RS-232C |
Sub-D 9 针母头 |
USB |
USB Host/Device 全速 |
VGA 输出 |
前面板: 可插FLASH卡的A型插座 |
电源 |
|
|
AC 100 ~ 240V, 50/60Hz |
附件 |
|
操作手册 x 1
电源线 x 1
USB 线(A型插头转小B型插头) x1 |
尺寸和重量 |
|
330(W) x 170(H) x 340(D) mm
约 6kg |
操作手冊 x 1
电源线 x 1
USB 线(A型插头转小B型插头) x1 GSP-830E 3GHz Spectrum Analyzer
Opt. 01 |
Tracking Generator |
Tracking Generator
- Frequency Range: 9k~3GHz
- Amplitude Range: -50dBm~0dBm
- Amplitude Accuracy: ±1dB@100MHz, 0dBm
- Amplitude Flatness: ±1dB@0dBm
- Harmonics: <-30dBc typical
- Reverse Power: +30dBm
- Impedance: Type: N female, 50Ω nominal
- RF output VSWR: < 2:1 |
Opt. 03 |
± 1ppm Stability |
* ±1ppm, 0~50 °C , ±1ppm/yr |
|
OPTIONAL ACCESSORIES |
ATA-001 |
BNC Antenna
(An additional ADP-001 is needed for fitting GSP spectrum analyzers) |
ATA-002 |
Near Field Probe
(An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers) |
GAP-801 |
Preamplifier Preamplifier with 10dB(typical), gain 9kHz ~ 6GHz |
GAP-802 |
Preamplifier Preamplifier with 20dB(typical), gain 9kHz ~ 3GHz |
RLB-001 |
Return Loss Bridge RLB Frequency Range 10MHz ~ 1GHz |
GTP-3000 |
Passive touch Probe Set
PR-03: Passive touch probe, SMA(F)
ADP-002: Adaptor, SMA(J/F) ~ N(P/M)
GTL-303: RF Cable Assembly, SMA(P/M), 600mm |
GKT-001 |
General Kit set
ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2
ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1
GTL-303: RF cable assembly(SMA(P/M),RD316,600mm)x2
GSC-002: Kit box x 1 |
GKT-002 |
CATV Kit set
ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2
ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2
GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2
GSC-003: Kit box x 1 |
GKT-003 |
RLB Kit set
GAK-001: termination 50 , N(P/M) x 1
GAK-002: Cap with chain, N(P/M) x 1
GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2
GSC-004: Kit box x 1 |
GKT-006 |
EMI Probe Kit set
ANT-01: 6cm Loop, H-Field Probe x 1
ANT-02: 3cm Loop, H-Field Probe x 1
ANT-03 6mm Stub tip, E- Field Probe x 1
PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1
ADP-01: N(P/M)~BNC(J/F) Adapter x 1
Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1
Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1 |
GRA-404 |
Rack Adapter Panel
Rack Mounting (19", 4U) |
GSC-001 |
Soft Carrying Case |
GTL-301 |
RF Cable RG 223 N(P/M), 1000mm |
GTL-401 |
DC Power Cord
DC power cord with DC Jack and lighter plug, Current 5A |
|
<script type=text/javascript>
</script>
|
|
|
